Janus Series 1100 Features

Model 1000 Door

The bar has once again been raised with the Series 1100 commercial door. The wind load rated version of the Pre-Assembled Industrial Door (PAID) features the traditional dependability and sturdiness of a commercial door, while significantly saving time and money during installation.  How?  The push up operation comes with brackets and tensioner pre-assembled.  The reduced drive chain hoist operation is delivered with brackets, tensioner, gears and chain drive pre-assembled on the door.  In addition, door and guides install to jamb as a single assembly.  Pre-assembly from the factory means less time spent on installation, therefore saving you money.  Backed by a one year warranty, our PAID Model 1100 is a solid and economical investment for commercial/industrial usage.






 

FEATURES

 
Nylon Stripping




Tough, durable, wide, heavy-duty nylon stripping controls curtain stretch and works in conjunction with the vinyl guide strip to reduce wear and deaden sound.






  

Slide Lock



The slide bolt assembly affixed to the bottom bar at each end of the door curtain fastens through the guide to securely keep the door locked and in the down position.  Padlocks can be attached to the side to further secure the door.  Bulb astragal is standard on all doors.







Door Stop




The flat door stop slide makes installation quicker.  Simply slide through the holder on the guide and affix with a fastener. 








9-1/2 Diameter Drum


9-1/2" diameter drums allow for lower headroom requirements.  An enclosed barrel houses the dead axle assembly and protects the factory-lubricated springs from direct contact with environment elements.  The inherent strength provided by the spiral barrel minimizes axle deflection, providing smoother operation.  Because the curtain is attached by screws and not seamed to the barrel, cost-effective replacement of either independent assembly is quick and easy.





Door Stops




Grease-filled, shielded radial ball bearings at the drums provide longevity and smooth operation.  Drums are embossed for rigidity. 









Door Latch


The ratchet tensioning device supplied as standard equipment on the door offers a simpler method of tensioning, while more accurately fine tuning all the springs on the door at the same time.  There is no extra hardware required.  Eight different positions on the tension wheel allow one to perfectly balance the door every time.  There are no pins required to hold the tension on the spring.  You simply just click it.
 






Door Curtain
The 26 gauge corrugated door curtain is manufactured from full hard galvanized ASTM A-653 grade 80 steel and coated with Super Durable polyester paint that is backed by a 40 year film integrity and 25 year no-fade limited paint warranty. 12 gauge wind locks are attached to both ends of the curtain.  The Model 1100 has been independently tested in accordance with ASTM E-330 to safely resist wind loads, rated +24.4 PSF and -27.0 PSF for opening widths through 8'8", and +19.4 PSF and -22.7 PSF for opening widths over 8'8" throughout 10'0".  The Model 1100 has also been designed in accordance with ASCE 7-02 and the Florida Building Code 2004 with 2006 Supplement and the International Building Code 2003.  Available in sizes 
up to 10’0” x 14’0” and in over 20 different standard colors.  Click here to view the color chart.




 
4:1 Reduced Drive Chain Hoist


 


A 4:1 reduced chain hoist offers smoother operation and is standard equipment on doors starting at 12'0" tall.  Chain hoist comes pre-assembled on the door.






Reinforced Bracket





Factory-intalled galvanized reinforced 12 gauge brackets are designed to easily snap on the the guides, reducing installation time.







Roll-A-Matic Electric Operator





Roll-a-matic electric operators are internally enclosed in the barrel to provide quiet and reliable operation.  The operator's design is compatible with transmitters and receivers, pneumatic sensing edges and other electric operation accessories.  Right side operation only.  Auxiliary operator hand chain not available.






Insulation



Insulation is made of a foil-backed, dual-layer polyethylene air-bubble insulation secured in place with a strong adhesive and joined by mylar film to provide an R value of 4 (top draft stop and side draft stops are also included in the insulation package).  Series 1100i only.





Header Seal




Top draft stop (not shown) mounts directly to the door curtain and provides a 2-3/4" weather seal between the door and the header.

The header seal (shown here) attaches directly to the header and extends up to 5" to the door curtain to form an effective barrier from environmental elements.





Three Manufacturing facilities located throughout the United States and a team of experienced door experts are available to assist you with any of your door needs.  Janus offers a three year
warranty on workmanship and material.


Guide Details

Universal mount 2" deep 16 gauge galvanized steel guides require no pre-installation modifications for wood, steel, concrete or masonry block applications.  Guides have deeper engagement, which allows the curtain to stay in place under more sever wind conditions.

Mounting Measurements


Roll up door diagram and side room requirements


rolling sheet door head room requirements  

An informed customer is the best kind of customer.  As such, a wide array of technical information is provided to you so that your Janus door selection and installation is made easier.  Please keep in mind that the Series 1100 door is the wind load rated version of the Series 1000 door; therefore, drawings shown will be for the Series 1000 door.  Click this link to view and print the shop drawing for your Model 1000 door.  Here is a helpful drawing of a sample completed door assembly.  Before you begin door assembly, read this helpful Model 1000 installation guide.  If it becomes necessary to adjust the tension on your door spring, follow these door tensioning instructions.


One of the most difficult decisions that you will make is selection of your Janus Model 1100 door color.  To aid in the process, we provide you with this handy color chart.  Please keep in mind that the color shown on your computer screen may not be exact.  To view the warranty information just click this warranty link.  

Many of our customers, particularly those along hurricane coastlines, may find this code information helpful.  If you need to work with a local code official, you may find this Janus Model 1000 technical specifications sheet useful.  Print it out and take it with you to aid in your discussions.

Janus Model 1000 doors may be delivered with several draft and seal options.  You may order your door with a draft stop, a piece of rubber that attaches to the door curtain or you may elect to purchase a header seal that attaches to the framed opening.  We also offer a side draft or 'guide weather assembly' that contains a rubber seal and foam strip that attach to the door guide and curtain to provide weather resistance.  Please note that the foam strip attachment is not shown in the guide weather assembly drawing.  Another option is to purchase an insulation package.  This package includes factory attached Foil Bubble insulating material (nominal R-4) and also includes the top and side draft stops.  With or without one of these options, we are convinced that you will enjoy your Janus Model 1000 door for years to come. 


Checkout button



To view pricing for this series door, click the red and white 'View Pricing or Checkout Now' button.  To view pricing for other Janus Series doors, click this link.